Mobile solution

Tuesday, March 18, 2014

Nokia E52 Charging Not Supported Problem Solutions

Nokia E52 Charging Not Supported Problem Solutions

Monday, March 17, 2014

iPhone 5 Full Detailed Schematic Diagram

iPhone 5 Full Detailed Schematic Diagram

This Diagram Show The Lightning Connectors .

Sunday, March 16, 2014

Repair Nokia Asha 300 Ringer Not Working Problem Jumper Ways

Repair Nokia Asha 300 Ringer Not Working Problem Jumper Ways
Repair Nokia Asha 300 Ringer Not Working Problem Solution
Repair Nokia Asha 300 Ringer Not Working Defect
Nokia Asha 300 Ringer Not Working Problem Jumperz

Saturday, March 15, 2014

GFIVE U808 Head Phone Mode Sulution

GFIVE U808 headphone mode problem/solution

GFIVE U808 headphone mode problem

GFIVE U808 headphone mode problem/solution

Friday, March 14, 2014

What To Do If You Drop Your iPhone In Water

If you ever happen to accidentally drop your iPhone in water then you will find the do-it-yourself procedure posted by iFixYouri useful, especially since warranties don’t cover water damage.

According to iFixYouri, a repair shop for iPhones, water damaged iPhone is one of the most common iPhone repair types.

Here is iFixYouri’s do-it-yourself (DIY) procedure:

It is imperative to remove the iPhone out of the water ASAP. Once the iPhone is out of the water, you want to make sure it is powered off.
If you get a white pinwheel on the screen and it won’t turn of, you hold down the power button and home button until it turns off. In the video we failed to record it powering back on after we powered it off. Wesimply repeated the ‘power off process’ and moved on to the next important step; remove the SIM card.
Once the SIM card is removed you want to put the iPhone in an uncooked bag of rice. Tighten the bag so all extra air is gone and seal it.
Wait 48 to 76 hours after the water exposure and then try it out. If you find at that time it is not functioning properly as a result of the iPhone water damage put back in the rice and mail it to iFixYouri who specialize in fixing water damaged iPhones.

Thursday, March 13, 2014

A Simple Way To Hard Master Reset Your Motorola Spice XT300

A Simple Way To Master Reset Your Motorola Spice XT300 :
To perform a Master Reset on your Motorola Spice XT300 reset follow the steps below:

with the phone off, press the power button and the "X" key on the keyboard
When the triangle appears press the "alt" and the "w" key on the keyboard
let the Motorola Spice XT300 reboot and your done!

Wednesday, March 12, 2014

Nokia C1 01 Mic Not Working Problem Solution

Nokia C1-01 Mic Not Working Problem Solution

Nokia C1-01 Mic Not Working Problem

Nokia C1-01 Mic Not Working Solution

Tuesday, March 11, 2014

Method To Secure Wireless Network from Hackers

The reason we secure a wireless network is to stop people from using the services of our network who do not have permission to utilize them.

It is harder to secure a wireless network from hackers as compared to a classic wired network. This is due to the fact that a wireless network can be accessed anywhere inside the range of its antenna.
In order to secure a wireless network from hackers, we should take proper steps to save ourselves against security issues. If you don’t secure a wireless network from hackers, you might end up without its service. The consequence might also include the utilization of our network to attack further networks. To secure a wireless network from hackers, you should follow these simple wireless networking tips:

Instructions:

1. Strategic antenna placement:

The first thing you have to do is to position the access point’s antenna in a place which restricts the range of its signal to go further than the required area. You should not put the antenna close to a window because glass can’t obstruct its signals. Place it in a central location of the building.

2. Use WEP:

WEP stands for Wireless encryption protocol. It’s a customary technique for encrypting traffic on a wireless network. You should never skip it as that will allow hackers to get instant access to the traffic over a wireless network.

3. Change the SSID, disable the broadcast of SSID:

SSID stands for service set identifier. It is the recognition thread utilized by the wireless access point due to which the customers are capable of starting connections. For every wireless access point arranged, select an exclusive as well as unique SSID. Also, if it’s attainable, hold back the broadcast of the SSID out over the antenna. It wont appear in the listing of offered networks, while being able to provide services as usual.

4. Disable DHCP:

By doing this, the hackers will have to decode the TCP/IP parameters, subnet mask as well as the IP address in order to hack your wireless network.

5. Disable or modify SNMP settings:

Change the private as well as public community settings of SNMP. You can also just disable it. Otherwise the hackers will be able to utilize SNMP to get significant info regarding your wireless network.

6. Utilize access lists:
For additional security of your wireless network, and if your access point support this feature, employ an access list. An access list lets us determine precisely which machinery is permitted to attach to an access point. The access points which include the access list can employ trivial file transfer protocol (TFTP) now and then in order to download modernized lists to steer clear of hackers.

Monday, March 10, 2014

Nokia X6 LCD Light Problem Solution Jumper Ways

Nokia X6 LCD Light Problem Solution Jumper Ways

Nokia X6 LCD Light Problem Solution By Jumpers

Nokia X6 LCD Light Not Working Solutions

Nokia X6 LCD No Display Solutions

Sunday, March 9, 2014

Nokia Asha 301 RM 840 Flash Files Firmware Updates

Nokia Asha 301 Supports the firmware RM-840. Nokia asha 301 belogns to the Nokia Mobile Generation BB5. Some time due to some reasons its firmware gets corrupted so you have to install new firmwares by flashing it with relevant flashing box. and also you need to download its flash files. So here are its latest firmware flash files.

Disclaimer : We are try our best to provide you the best working flash files and firmware for every new and old mobile phone model. Please use them at your own risk.
Caution : Before You flash or format a mobile phone please take a backup of important data because flashing and formatting will remove all data.

DOWNLOAD NOKIA ASHA 301 RM-840 FIRMWARE

Saturday, March 8, 2014

Nokia 1661 RH 121 Firmware Flash Files Updated Version

Download Here Free And Direct Nokia 1661 RH-121 Firmware Flash Files Updated Version With Any Waiting. In The Downloading Link All Flash Files Required For Nokia 1661 With Firmware Support RH-121 Are Given. The Files Included Are MCU, CNT And PPM. Just Click The Downloading Links Given Below.

DOWNLOAD Nokia 1661 RH-121 Firmware Flash Files

LINK1 : http://www.4shared.com/rar/K6NV4ovTce/Nokia_1661_RH-121_Flash_Files.html

LINK2 : http://www49.zippyshare.com/v/7453421/file.html

Friday, March 7, 2014

Nokia E51 Mic Problem Jumper Ways Solution

Nokia E51 Mic Problem Jumper Ways Solution

Nokia E51 Mic Not Working Problem Solution

Thursday, March 6, 2014

Create Animated GIFs on Android

If you want to share movies from your Android phone, making and sharing a quick animated GIF instead is definitely a better option than sharing the whole movie because it will consume a lot of your monthly bandwidth. An animated GIF can be made using GIF Droid. A video can be taken and turned into an animated GIF that you can send to anyone in seconds.
Instructions:

First install GIF Droid from the Android Market, and then open the application (app).
Click Select Video button. This will open your gallery to select a video. OR Click Record Video button. This will open your phone camera to record a video.
The section of the video you want to convert into an animated GIF can be chosen through sliding the grey bars at the start and end. Now click the Next button present at the extreme end of the screen.

To reduce the size of animation through cutting out unwanted sections, select frames from the video you would like to use. Now click on the Create GIF button at the extreme right end of the screen to pin down the project.

Preview your GIF and share by hitting the Share button (which is the second last button on the left side of the screen).
You can also rename the GIF by clicking the Rename button (which is the second last button on the right side of the screen).
You can make another GIF by tapping the Create another button from the extreme right end of the screen.
You can even delete the one you just made by pressing the Delete GIF button from the extreme left end of the screen.

Have Fun :)

Wednesday, March 5, 2014

Install Windows 8 On Pendrive

If want to install windows latest o/s on your PC using USB Pendrive then here is how you can do this. Windows 8, the latest edition to Microsoft’s OS evolution is making big waves in the PC arena. We are sure that many of you are eagerly waiting to try out the new Windows 8 Preview on your PCs, to have a first look and glimpse of what Microsoft has in store for you with the new operating system. Installing Windows 8 on your PC, which already has Windows 7 or Windows XP installed can be quite a task—backing up data, clearing space for the new OS, reinstalling, and so on.

However, before that, the pain of burning the downloaded ISO file on a DVD or on a USB pen drive to get the installation ready also makes it a killing task. We shall show you how you can relax and enjoy the complete features of Windows 8 on your existing PC without going through any of the above cumbersome exercises and run the new operating system in less than half the time.
This How to will reveal the installation of Windows 8 on any USB storage and then running the operating system directly from the USB drive, itself. You will not have to go through any of the painful set-up procedures that the set-up installer asks, while installing Windows 8 on your PC. All you need to do is download a simple utility, a 16GB or higher USB storage drive, the Windows 8 ISO file, WinRAR archiver and your existing PC. Before we begin, we would like you to know that using a USB pen drive will suffice, but since the speed of a regular USB pen drive is very sluggish, we recommend using an external USB storage drive.

Step 1

To begin with, assuming you have a PC that already has Windows 7 running and WinRAR installed, extract the file ‘install.wim’ from the Windows 8 ISO file using WinRAR. This file will be located under the folder ‘Sources’ and is around 2GB in size. Extract it to the desktop. Now go ahead and download a tiny 500 KB utility, called ‘GimageX’ from the ‘http://tinyurl.com/gimagexv2’ and extract the file to a folder on your desktop. This folder will have both the 32-bit and 64-bit utility. Choose the appropriate one depending on the operating system that you are already running on your PC. Now, before we use the utility, we have to prepare the USB drive for installing Windows 8. Make sure you have all your data backed up from the drive, as we would need to clean out the drive completely. Proceed ahead when ready.

Step 2

Plug-in the USB drive, wait for a while, if the drivers are not yet installed and let the system recognize the new drive. Now start the Windows command prompt and type the following commands one after the other as given below:

Diskpart (This built-in utility will help repartition and format the new drive)
List disk (This command will list all the drives present on your system. Note down the drive number of your USB drive)
Select disk # (Replace the # with the drive number that represents your USB drive in the list)
Clean (This command will wipe the entire partition table of the USB drive)
Create partition primary (This command will create a primary partition on the USB drive)
Select partition 1 (This command will select the primary partition for the rest of the process)
Format fs=ntfs quick (This command will quick format the primary partition in NTFS file format)
Assign (This command will assign a drive letter to the new partition for Windows to work on)
Active (This command will make the partition active to enable booting)
Exit (Closes the DISKPART utility)

Now that the drive is ready for installation of the new operating system, start the GimageX utility and click on the tab ‘apply’. In the source field, specify the ‘INSTALL.WIM’ file, which you earlier extracted from the Windows ISO file. In the destination field, select the USB drive letter that you just got ready. Let all the settings in the remaining fields be untouched and hit the ‘Apply’ button. GimageX will not extract the contents of the Install.wim file, which contains the necessary Windows 8 folders and system files on the USB drive. Note: This procedure should take a few minutes and will depend on the speed of your USB drive.
If you are using a regular pendrive, then the time taken will be longer than on any 2.5-inch external USB storage drive. Once done, GimageX will display that the process is complete. Exit the GimageX utility and start the command prompt again. We now need to make the USB drive bootable in order to run Windows 8 from the USB drive. For this, we will have to specify a command from the command prompt window. Run the following command as below.

Step 3

Bootsect f:windows /s f:

In the command above, F: is the drive letter of the USB drive where the Windows 8 files have been extracted to earlier by the GimageX utility. Remember to replace the drive letter of your USB drive, accordingly. This command will take a few seconds to transfer the necessary booting files to the USB drive. Once done, you can quit from the command prompt.

Step 4

That’s it! Shut down your PC, get into the BIOS, enable booting from the USB drive and restart the PC. Your PC will now boot from the USB drive directly into Windows 8. All that is needed in the next step is to specify the serial key and give details, such as username and password. Windows will be up and running in no time and install the necessary drivers in the background. You can now go ahead and configure Windows 8, as you wish and install all your software and applications, as you would on a new PC. All software and applications will be installed on the USB drive by default, unless specified with a different path.

Step 5

Make sure you have an Internet connection set-up for your PC, if you are using your Microsoft Live (Hotmail) account to be linked with your Windows 8 installation. Once done, you can simply shut down, disconnect your USB drive and get back to your older operating system without any trace of having Windows 8 installed on your PC. You can plug-in this USB drive on any other PC and have Windows 8 running on that PC.
You can also use this trick to install Windows 8 on an internal hard drive and have Windows 8 installed without having to go through the entire process of installing the OS using a DVD ROM.