Mobile solution

Showing posts with label unlock. Show all posts

Tuesday, February 4, 2014

Unlock Memory Card Password Trick

SORRY FRIENDS THIS METHOD IS NO MORE SUPPORTED...

If you protect your memory card with password and forgot that after few day then step easy method How to unlock Memory card without software.

Hacking or finding memory card password.
Formatting corrupted memory card(but no guaranteed).

There are many methods to find memory card password.

Install and launch MMCPWD application. it will display some special characters including your password.(MMCPwd.sis)
Locate mmcstore file. install and launch System Explorer or FExplorer application. go to c:system and open (using unicode/hex editor) the mmcstore file. it will display your password.
NOTE: you can also copy the mmcstore file to any folder of your phone memory, rename it to mmcstore.txt and open it without using any unicode/hex editor).

Instructions:

open up fe explorer thingy.
Go to C:system folder and locate a file called mmcStore. Scroll down till you find it.
Copy it to C:nokiaothers
Highlight it
click options
FILE>RENAME
IT should turn blue: right click then write “.txt” (should look like “MMCSTORE.txt”
try to open it, (that should be your password, if nothing happens then go to 9.)
connect phone to pc
Open the file from C:NOKIAOTHERSMMCSTORE
copy the file to your desktop
open with Windows notepad/ microsoft word
that should be your password

Hope these work for you if still need software than you reply me i will provide as soon as possible.

Have Fun :)

Sunday, December 15, 2013

How to Unlock Android Phone After Too Many Pattern Attempts Without Factory Reset

1. Completely power off and power on your Galaxy-S phone.

2. Right after you pass the Galaxy-S and just before the Verizon Wireless logo video ends, immediately tap on the home button extremely fast and repeatedly (at least 4-5 times per second). If the Emergency Call button pops up, click that every now and then (3-5 times) but keep tapping on the home button. During this process your phone may flash the password screen or keypad screen just a few times and your phone will seem to be lagging due to the tapping.

3. Keep tapping until you see your Android home buttons stay steady at the bottom. Voila, you’re in your phone! If the emergency keypad constantly shows up or if it shows the Google account screen constantly, you have failed. The success rate can be around 15-50% so keep trying until it works. (You may want to grab a young phone-savvy guy or girl to do it if your fingers are too slow)

4. Find and run the Settings App and go to Accounts & Sync.

5. Under Manage Accounts, remove all accounts except your Google account.

6. Press your power button off and on and enter your correct Google account information.

7. It will ask for a new security pattern. Enter it twice and you are done!

I recommend the tapping method first but if that doesn’t work or you don’t have a home button, here is a different method to try pretty much based on the same concept. (again, will depend on app compatibility and may not work for all phones)

This method uses a free app called Screen Lock Bypass. (thanks to Michele for introducing this, but no need to purchase the Pro version) Please use this at your own risk as I cannot be responsible for any of the results caused from using this app. Basically, you’ll be using this app to bypass the screen lock and delete the other accounts blocking your Google username/password to accept.

1. Go to the Android Market download page on your desktop and install the app. (Yes, you are able to install apps using your desktop instead of your phone) Direct link: https://market.android.com/details?id=se.curity.android.screenlockbypass&hl=en (note: You need to login to the Android Market using your Google username and password that you used when you first set up your phone. This is the username and password that “should have” unlocked your phone in the first place.)

2. Select the phone you have (this is why you need to login with the right Google ID) and install the app. Wait about 5 minutes or restart your phone and wait a good amount of time for the app to fully install.

3. On the app instructions, it says to install any other app to trigger the Screen Lock Bypass app. I did not do this but for me, restarting the phone, waiting, soft off and on seemed to trigger it. (may have been triggered by a message though, this is the part where it unexpectedly blanked and disabled my screen for a good while.)

4. If it worked and bypassed the “too many pattern attempts” screen, go to phone Settings and then select Accounts & Sync.

5. Under Manage Accounts, remove all accounts except your Google account. (this should enable your Google username and password)

6. Go to Settings and select Applications, then Manage Applications.

7. Find Screen Lock Bypass and uninstall the app. (this will trigger the “too many pattern attempts” screen immediately)

8. Use your original Google username and password to finally unlock your phone properly.

9. Enter your new security pattern twice to finish!

If Method 2 worked for you, please leave your comments with your phone make and model to let us know!

Method 3

This was suggested by commenter Guru and has potential to work with all phones as it was claimed to work with the Galaxy S2.

Pre Condition: You remember the pattern and you remember your Google password and Android account is listed while using instructions below.

1. Using your computer, log into your Google account. You can verify your correct Google account using the Additional Tip at the bottom of this article.

2. Go to this link directly – https://accounts.google.com/IssuedAuthSubTokens OR click your e-mail on the top right corner, select Account settings, then hit “Visit the previous version of the Google accounts screen” towards the bottom, click “Authorizing applications & sites ” under your Personal Settings > Security.

3. Under “Connected Sites, Apps & Services – “Revoke Access” of your Google Account with Android. You will see the screen showing “You have successfully revoked access to Full Account Access”
[Alternate for step 3 - If you have already signed up for 2-Step Authorization previously and are able to generate a new application-specific password at the bottom, go ahead and generate a new password and use that password to unlock your device]

4. Enter Gmail login and password on your phone. It will now accept your login details and will show a pattern screen. Enter the “correct” pattern and you can see the home screen.

Again, if this works for you, let us know!

Good Luck!

[Additional Tip]
If you don’t remember your Google username and password, it may be an account that was used during signup and never used afterwards. You can confirm this by logging into your Google Account and going to this page: https://market.android.com/account. Select the Settings tab and you should be able to see your phone device. If you do not see your phone listed, it is probably under a different Google ID. If your phone carrier cannot retrieve your Google e-mail used during signup, try this link to possibly retrieve it:
https://accounts.google.com/RecoverAccount

[Note: If these solutions didnt work for you, the last thing I can recommend is a factory reset which is normally done through a simple button combination that is different for each phone. You should be able to google it or find factory reset instructions from your phone manufacturer or cell phone service provider at no charge.]

Friday, November 22, 2013

3GS Jailbreak Unlock Guide ios 6 0 1 tethered

What we need to do this?

1= A iPhone 3gs with supported bass band for unlock with ultrasnow.
2= iPhone2_1_6.0.1_10A523_Restore.ipsw
3= iPhone2,1_6.0_10A403_Restore.ipsw
4= redsn0w_win_0.9.15b3 or later version

Warning

Before starting be very careful do full backup of your phone using iTunes. also save SHSH blobs using redsnow to revert back to your current version of ios.

This method is tested by me and working.you see in pictures. do at your own risk i am not responsible of any damage or any mistake during this work.

after doing backup of your device.
connect iphone with pc and open redsn0w_win_0.9.15b3 then go to Extra > Even more > Restore
and select iPhone2_1_6.0.1_10A523_Restore.ipsw redsnow prompt you that redsnow doesnt recognize this ipsw but it can still prevent a bassband update select yes.

redsnow will process ipsw and then restore to iphone this will tack more then 10 minutes approx to complete this possess.

now you need to jailbreak this phone to get working

open redsn0w_win_0.9.15b3 then Extras and select ipsw and select
iPhone2_1_6.0_10A403_Restore.ipsw Now go back and press jailbreak.
and follow the instruction given by redsnow. this will complete in few minutes. after this possess complete you will see phone in working condition but when you press cydia it will close immediately don.t worry.

now open redsnow again and press Extras and then Just boot (just boot tethered right now) after this phone will be normal cydia and other apps will work now.

now go to cydia and add source pointed in picture. and install ultrasnow and ultrasnow fixer.

after installing ultrasnow and ultrasnow fixer phone should be unlocked. if still searching just reinstall ultrasnow. phone will recive network signals now.

This is tethered jailbreak because untethered jailbreak for ios 6.0.1 is not yet released.

So Good Luck all of you friends who give some time to read this.

Sunday, November 17, 2013

Lava Iris 349 Google Account Pattern Unlock Remove

u need to boot ur phone into fastboot (Follow exactly what i said bellow)

Power off phone
Pull out Battery & insert it again
Press Volume Down + Power Button for 20 seconds
Ur phone will boot up with fastboot

Now open Android Multi Tool & Press 8 from ur PC keyboard & press Enter

Android Multi Tools v1.02b

DOWNLOAD